1903 Mannlicher Schoenauer For Sale
Mannlicher Schoenauer Rifle Serial Numbers History
Mannlicher Schoenauer Rifle Serial Numbers
Steyr Mannlicher Schoenauer Serial Numbers
Mannlicher Schoenauer Serial Number Date
Mannlicher Schoenauer Rifle Serial Numbers Chart

6.5 X 54 Mannlicher Schoenauer Rifle Jun 02, 2011 Serial number is 11372. There is a number on the bottom of the stock, 27817. The gun is in beautiful condition. MANNLICHER SCHOENAUER SPORTING RIFLES gun model and pricing information. Steyr Mannlicher is a firearms manufacturer based in Sankt Ulrich bei Steyr, Austria. Mannlicher schoenauer. Mannlicher-Schonauers are/were made to be used. The stock was the original one & was stamped with the rifle serial number. Thanks in advance for any assistance. Link to the Mannlicher photos is included here Thanks for your help. Now living in Alberta, Canada. Big Mauser fan, but last week I bought my first Mannlicher. A 1958 Model MC in 30-06 caliber, serial number 24561. Rifle is in perfect condition & fitted with a swing-off Pachmayr scope mount & 4x81 Weatherby Imperial scope. Mannlicher Schoenauer Rifle Serial Numbers. By sweredypfi1986 Follow Public. The right side of the barrel shank is marked with the serial number.

The Mannlicher-Schönauer Model 1952 Carbine

By the Guns and Shooting Online Staff

Mannlicher-Schoenauer Model 1952 Carbine. Photo by Chuck Hawks.

'The World's FinestRifle' was introduced in 1903 and manufactured without fundamental changeuntil 1971. The action was designed by Ferdinand Ritter von Mannlicher and thefamous spool magazine by Otto Schönauer. The Model 1903 military model wasadopted as the standard service rifle of Austria and Greece, chambered for the6.5x54mm M-S cartridge. Model 1903 civilian versions were offered as rifles orcarbines. Rifles came with typical sporting rifle half-stocks and23.5' barrels, while carbines were supplied with slender full lengthstocks and 17.7' barrels. Throughout its long production life Steyr ofAustria owned the rights to manufacture the rifle.

The 1903 Carbine was manufacturedonly in 6.5x54 caliber and became the inspiration for what are today known as'mountain rifles.' Its full length stock gave rise to the term'Mannlicher stock,' which is still used today to describe a sportingrifle with a full length stock.

There were numerous detail changes,including the shape of the buttstock, over the years. These changes accounted for thevarious models, which included the pre Second World War Models 1903, 1905, 1908,1910 and 1924 (High Velocity Sporting Rifle). There was a gap in the productionof Mannlicher-Schoenauer sporting rifles extending from the late 1930's to1950, due to Adolf Hitler and World War II. Post war models included the Model1950, Model 1952, Model 1956-MC, Magnum Rifle and Model 1961-MCA.

The signature Mannlicher-Schoenauercartridge was always the 6.5x54mm, but over the years the rifle was also chambered for manyother cartridges. The early actions were sized to the 6.5x54mm cartridge and were not longenough to accommodate the Mauser '57mm' cartridges (7x57, 8x57, etc.)or the even longer .30-06 Springfield and its descendents. As these became thedominant sporting cartridges around the world, the M-S action was lengthened toaccommodate them, hence the Model 1924, introduced in 1925 as the High Velocity Rifle.

The rifle that is the subject of this article is a Model 1952 Carbine in .270 WinchestercaIiber. In the U.S., Stoeger Arms Corporation was the official Mannlicher-Schoenauer importer and Steyr worked closely with Stoeger to produce rifles suitable for the American market. OurCarbine is marked, reading from front to back, 'Made in Austria / Original / Mannlicher / Schoenauer / Mod. 1952 / Kal. .270' in six lines on the top of the front receiverring. The right side of the front receiver ring is stamped with the serial number, as are the right rear side of the barrel andthe underside of the bolt handle. 'Stoeger Arms Corporation New-York SoleU.S. agents' is stamped in a circle on the bottom of the magazine floorplate, above a small Steyr logo. The left front of the receiver and left rear sideof the barrel show proof marks and the left side of the receiver is stamped,'Steyr - Daimler - Puch A.G., Steyr' followed by the bullseye Steyr logo.

The Model 1952 was the last M-Swith a straight comb designed for use with open, iron sights. The comb is highand thin with quite a bit of drop at heel, in the European style. The Model1956-MC introduced a high Monte Carlo comb designed for use only withtelescopic sights. The final Mannlicher-Schoenauer, the Model 1961-MCA, wore alower, compromise Monte Carlo stock that was intended to allow the use ofeither the supplied iron sights or a scope. (A full review of a Model 1961-MCACarbine can be found on the Product Reviews index page.) Because of itstraditional style stock, absence of stripper clip receiver cuts, steel safetylever at the right rear of the action (which became a plastic tang safety onthe 1961-MCA), swept back bolt handle (introduced with the Model 1952) and availabilityin modern calibers, some Mannlicher-Schoenauer fans consider the Model 1952 tobe the apex of the sporting rifle series.

The Mannlicher-Schoenauer actionhas been described in previous articles, but we will review it here. The M-S isa cock on opening, controlled feed, turn bolt action with dual front lockinglugs. Bolt rotation is approximately 90-degrees. The extractor is a large clawmounted at the right front of the bolt, while the sliding ejector is mounted atthe front left side of the bolt. The ejector flips the fired case clear of theaction when it contacts the husky bolt stop in the left side of the split rearreceiver ring. The force of ejection depends on how hard and fast the bolt isoperated, so fired cases can be thrown well clear of the action or depositedgently in the hand, as desired.

The M-S controlled feeding system is completelydifferent from the familiar Mauser 98 system also used in Winchester Model 70,Kimber 84 and similar modern rifles. The machined M-S extraction/ejection partsare smaller, tidier and probably stronger, but more expensive to fabricate and fit. Aswith a Model 98 Mauser, cartridges should normally be fed from the magazine,not single loaded directly into the chamber, although the extractor is beveledenough to allow it to over-ride the rim of a chambered cartridge if the bolt isclosed smartly.

The Schoenauer rotary magazine is easily removed, without tools, for cleaning. It holds five .270 Winchester cartridges and is loaded from the top, through the receiver's generous ejection port. Its design positively retains each cartridge in place, preventing the battering of bullet tips due to recoil. Cartridges are fed from directly below the bolt in a straight line for optimum feeding reliability. These magazines are machined for a specific cartridge, in this case .270 Winchester only. A button at the top right side of the receiver's ejection port allows ejecting all of the cartridges from the magazine at once.

The bolt release is a convenientlever at the left rear of the receiver. Bolt disassembly can be accomplishedwithout tools, merely by removing the bolt from the receiver and turning thecocking piece. All screws, even the rear sling swivel screw, are indexed andthis was done throughout the entire production life of M-S rifles and carbines.The barreled action, including the bolt, wears a highly polished, bluedexternal finish, while the interior of the contoured barrel is hand lapped to amirror finish. After 1952, the bolt handle was polished and left in the white.

All models came with a flat'butter knife' bolt handle that was located well forward of thetrigger guard. This was due to the design of the action, which has a split rearreceiver ring through which the bolt handle passed as it was drawn back. Thismostly eliminated the bolt wobble that plagued the Mauser 98 action. However,the split rear receiver ring was to cause trouble later, when the use oftelescopic sights became widespread, as it prevented the use of conventionalscope mounts on top of the receiver. Scoped M-S Rifles and Carbines are usuallyfitted with side mounts or, later, the specially designed Redfield top mount.

The buyer had the option of anexternally adjustable double set trigger or an internally adjustable singletrigger. (Stock removal is required to adjust the single tr